Fluid Nozzle(20) - List of Manufacturers, Suppliers, Companies and Products

2-fluid nozzle "Full cone nozzle (small spray) CBIMJ"

Wide flow adjustment range! A full cone nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Full Cone Nozzle (Low Volume Spray) CBIMJ" is a two-fluid full cone nozzle that generates a fine mist with an average particle diameter of 100μm or less, featuring a circular spray pattern with an even flow distribution. It consists of four components: a nozzle tip, core, cap, and adapter, and is a liquid pressurization type that supplies liquid under pressure to the two-fluid nozzle. The spray angle is 20°. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Circular spray pattern with even flow distribution ○ Wide range of spray flow adjustment ○ Minimum spray flow among two-fluid systems ○ Compact type ○ Structure that is resistant to clogging For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-fluid nozzle "Full cone nozzle (small spray / compact) SCBIMJ"

Super compact type! A small amount spray conical nozzle with a wide flow adjustment range.

The "Conical Nozzle (Small Amount Spray / Ultra Compact) SCBIMJ" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid conical nozzle that generates a fine mist with an average particle diameter of less than 100μm. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the outer perimeter in an internal mixing air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Circular spray pattern with uniform flow distribution ○ Minimum spray flow rate among two-fluid systems ○ Ultra-compact design with an overall length of about 42mm ○ Equipped with ON-OFF control function ○ Liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-fluid nozzle "Filled Cone Nozzle LSIM"

Lightweight and compact type! Ultra-low pressure mist generation two-fluid charging cone nozzle.

The "Conical Nozzle LSIM" is a large flow two-fluid conical nozzle composed of multiple parts including a nozzle tip, cap, adapter, and O-ring, which generates a fine mist with an average particle diameter of 40μm or more. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Liquid flows in the center of the nozzle while compressed air flows around the periphery in an internal mixing external air design.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Low running costs due to blower air specifications ○ Maximum particle diameter of 150μm at an average particle diameter of 80μm ○ No coarse particles due to the fine atomization design of the nozzle ○ Compact and lightweight ○ Spray angle of 20° For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-fluid nozzle "Fan-shaped nozzle VVEA"

Fine mist and medium mist generated! A two-fluid fan-shaped nozzle capable of thin, powerful spraying in the thickness direction.

The "Fan-Shaped Nozzle VVEA" is a two-fluid nozzle composed of multiple parts including a nozzle tip, cap, mixing adapter, and liquid socket. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization. This is a pre-mix type that combines liquid and compressed air within the nozzle adapter. The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.2 to 0.7 MPa. 【Features】 ○ A nozzle that sprays fine mist with a thin thickness and uniform distribution ○ A two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of over 50 μm ○ Capable of spraying with a thin thickness direction and strong impact force ○ A liquid pressurization type that sprays at a pressure of approximately 0.2 to 0.7 MPa ○ Offers a wide range of flow adjustment with minimal variation in spray angle For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-fluid nozzle "Fan-shaped nozzle VVP+AS"

Built-in check valve on the air side! Mist fan-shaped nozzle usable with both 1 and 2 fluid specifications.

The "Fan-Shaped Nozzle VVP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single-fluid and dual-fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to function as a single-fluid nozzle in the medium to high water flow range and as a dual-fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual-fluid nozzle. 【Features】 - Usable in both single-fluid and dual-fluid configurations - Single-fluid in medium to high water flow range, dual-fluid in low water flow range - Wide turn-down ratio (throttling ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Built-in check valve on the air side For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-fluid nozzle "Fan-shaped nozzle DDRP+AS"

Compatible with multi-variety production! Mist fan-shaped nozzle usable with both 1st and 2nd fluid specifications.

The "Fan-shaped Nozzle DDRP+AS" is a fog fan-shaped nozzle composed of multiple parts including the nozzle body, adapter, air socket, and check valve, and can be used in both single fluid and dual fluid configurations. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. A check valve is built into the air side, allowing it to be used as a single fluid nozzle in the medium to high water flow range and as a dual fluid nozzle in the low water flow range. It is a liquid pressurization type that supplies liquid to the dual fluid nozzle. 【Features】 - Usable in both single fluid and dual fluid configurations - Single fluid in medium to high water flow range, dual fluid in low water flow range - Wide turn-down ratio (throttle ratio) of 1:20 - Suitable for use in environments with minimal variation in flow distribution and spray angle - Spray pattern thickness angle is wide at 60°, allowing for surface cooling For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK.S"

Suction type! Hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Hollow Cone Nozzle (Small Amount Spray) CBIMK.S" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less, featuring an annular spray pattern. It consists of four components: a nozzle tip, core, cap, and adapter, and operates as a suction type that draws liquid using the force of compressed air for spraying. It has a spray angle of 60° and employs internal mixing to atomize the liquid with compressed air inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Suction type that does not require a liquid pressurizing device ○ Annular spray pattern ○ Spray angle of 60° ○ Compact type For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-fluid nozzle "Fan-shaped nozzle (small amount spray / ultra-compact) SCBIMV"

Super compact type! A small amount spray fan nozzle with a wide flow adjustment range.

The "Fan-shaped Nozzle (Small Amount Spray / Ultra Compact) SCBIMV" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of less than 100μm. It features an internal mixing design that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the periphery in an internal mixing air type.) It is a liquid pressurization type that supplies pressurized liquid to the two-fluid nozzle. 【Features】 ○ Switchable between two spray patterns: uniform & triangular distribution ○ Minimum spray flow rate among two-fluid systems ○ Wide range of flow adjustment ○ Ultra compact type with a total length of approximately 42mm ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-fluid nozzle "Fan-shaped nozzle (fine mist / ultra-compact) SCBIMV.S"

Super compact type! A small spray fan-shaped nozzle with an even flow distribution across the entire area.

The "Fan-Shaped Nozzle (Fine Mist / Ultra Compact) SCBIMV.S" consists of four components: nozzle tip, core, cap, and adapter, and is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of less than 30μm. It is an internal mixing type that atomizes by mixing compressed air and liquid inside the nozzle. (Compressed air flows in the center of the nozzle, while liquid flows around the periphery in an internal mixing air type.) It is a suction type that draws up the liquid and sprays it using the force of compressed air. 【Features】 ○ Uniform spray pattern with consistent flow rate across the entire area ○ Minimum spray flow rate among two fluids ○ Ultra compact design with a total length of approximately 42mm ○ No need for a device for liquid pressurization ○ Equipped with ON-OFF control function For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-fluid nozzle "Hollow Cone Nozzle (Low Flow Spray) CBIMK"

Compact type! Hollow cone nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Hollow Cone Nozzle (Low Volume Spray) CBIMK" is a two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 100μm or less, featuring an annular spray pattern. It consists of four components: nozzle tip, core, cap, and adapter, and is a liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It has a wide flow adjustment range with a spray angle of 60°. The internal mixing design allows for the atomization of liquid by mixing compressed air and liquid inside the nozzle. 【Features】 ○ Two-fluid hollow cone nozzle that generates a fine mist with an average particle diameter of 100μm or less ○ Liquid pressurized type that sprays at a pressure of approximately 0.1 to 0.3 MPa ○ Annular spray pattern ○ Wide range of spray flow adjustment ○ Structure that is resistant to clogging For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 100μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV" is a mist generation nozzle that can switch between two spray patterns: uniform and triangular distribution. It is a two-fluid fan-shaped nozzle that generates mist with an average particle diameter of less than 100μm. It is a liquid pressurization type that sprays at a pressure of approximately 0.1 to 0.3 MPa. It can produce two patterns: a uniform flow distribution across the entire area and a triangular distribution that is strong in the center and gradually weakens towards both ends, offering a wide range of flow adjustment. 【Features】 ○ Switchable between uniform and triangular distribution, two spray patterns ○ Minimum spray flow in two fluids ○ Compact type ○ Structure resistant to clogging ○ Spray angles of 45°, 80°, and 110° For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-fluid nozzle "Fan-shaped nozzle (small amount spray) CBIMV.S"

Small spray type! A two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less.

The "Fan-Shaped Nozzle (Small Amount Spray) CBIMV.S" is a space-saving, high-performance nozzle designed compactly from the BIM series of mist generation nozzles. It is a two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less. It is a suction type that does not require a liquid pressurization device, using compressed air to draw up and spray the liquid. The two-fluid nozzle consists of four parts: nozzle tip, core, cap, and adapter, providing an even flow distribution across the entire area. 【Features】 ○ Two-fluid fan-shaped nozzle that generates a fine mist with an average particle diameter of 30μm or less ○ Even spray pattern with uniform flow across the entire area ○ No device required for liquid pressurization ○ Compact type ○ Spray angle of 80° For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-fluid nozzle "Fan-shaped nozzle DOVEA"

Fine mist and medium mist generated! A two-fluid fan-shaped nozzle with a large flow adjustment range and small spray angle variation.

The "Fan-Shaped Nozzle DOVEA" consists of four components: the nozzle body, pipe, mixing adapter, and liquid pipe, and it is a high-flow two-fluid fan-shaped nozzle that generates fine mist with an average particle diameter of 50μm or more. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization. (It is a pre-mix type that mixes liquid and compressed air within the nozzle adapter.) The liquid is pressurized and supplied to the two-fluid nozzle, spraying at a pressure of approximately 0.07 to 0.7 MPa. 【Features】 ○ Uniform flow rate and particle diameter across the entire range ○ Wide adjustment range for spray flow rate with minimal spray angle variation ○ Large foreign object passage diameter, making it resistant to clogging ○ Uniform flow distribution, suitable for use in multiple arrangements ○ Spray angles of 55°, 70°, 95°, and 110° For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

2-fluid nozzle "Fan-shaped Nozzle DDA"

Fine mist and medium mist generated! A two-fluid elliptical spray nozzle that produces fine mist with a volume of 50μm or more.

The "Fan-Shaped Nozzle DDA" consists of four components: the nozzle body, pipe, mixing adapter, and liquid pipe, and it is a high-flow two-fluid elliptical spray nozzle that generates fine mist with an average particle diameter of 50μm or more. It features internal mixing, where compressed air and liquid are mixed inside the nozzle for atomization (a pre-mix type that mixes liquid and compressed air within the nozzle adapter). It is a liquid pressurization type that supplies liquid to the two-fluid nozzle under a pressure of approximately 0.07 to 0.7 MPa for spraying. 【Features】 ○ Has an elliptical spray pattern, allowing for wide-area spraying ○ Liquid pressurization type that sprays at a pressure of approximately 0.07 to 0.7 MPa ○ Wide range of spray flow adjustment with minimal spray angle variation ○ Large foreign object passage diameter, making it resistant to clogging ○ Uniform flow distribution, suitable for use in multiple arrangements For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

1 Fluid Nozzle (Straight) "Straight Nozzle (Round Bottom Specification) CCRP"

A structure that is resistant to clogging! A straight nozzle that generates strong impact force flow.

The "Straight Nozzle (Round Bottom Type) CCRP" is a straight nozzle that generates a strong impact stream with a narrow, straight spray pattern. When mounted on a header pipe, the nozzle inlet protrudes roundly into the pipe, making it less likely for foreign objects to clog the nozzle inlet. It is ideal for cleaning applications such as paper felts, screens, machinery, parts, vehicles, transport boxes, and bottles. It is used in the paper, pulp, printing, and food industries. 【Features】 - Narrow, straight spray pattern - Structure that minimizes the inflow of foreign objects into the nozzle - Resistant to clogging - Straight nozzle that generates a strong impact stream - All-metal integrated nozzle For more details, please contact us or download the catalog.

Company：いけうち（霧のいけうち）
Price：Other

nozzle

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluid Nozzle(20) - List of Manufacturers, Suppliers, Companies and Products

Fluid Nozzle Product List